> The Lounge     Printing     STARTT Startt 3D printer
Startt 3D printer
 STARTT   Started by Richard whitehouse   2017-11-15 17:47:25 +00:00   Comments: 5    Viewed: 1462

  1. i find the instructions for installing the startt drive belt. I abviously have to cut the drive belt to length, but how to join the ends?
    Richard whitehouse, 2017-11-15 17:47:25 +00:00
  2. You can use a zip tie to tie the belts together. Make sure the teeth of the belt line up with each other and tighten the zip tie around them completely. Cut off the excess zip tie. Make sure the belt is tight before doing this.
    Yadunandan Vijayaraman, 2018-11-23 17:19:56 +00:00
  3. John T.
    John T. Member Aurora, IL
    Since it seems iMakr disabled starting new threads, so I'm hijacking yours, Richard! Luckily, you probably won't care since it's been a year since you posted this, but thanks for bringing it near the top of the list for me, Yad. :)

    My new topic is this:
    Why did iMakr stop selling the STARTT? Does anyone know?
    John T., 2018-12-12 15:49:16 +00:00
  4. Kc copling
    Kc copling Member
    I dont know why they stopped selling it but I do know I had a order to buy one before they took it down and they never shipped it and wouldnt even respond to messages about when it would arrive . That was back in the very beginning of october .
    Kc copling, 2018-12-13 17:52:32 +00:00
  5. S W
    S W Member Rochester Hills
    Do you want mine? All assembled. Could almost say never used - just never got it working right without a heated base. The filament would pull right off the base plate. Probably a post in here that would solve that. Nozzle clogged but could easily be cleaned out. Turned out to be too much fuss for me to mess around anymore with it. Posting on ebay - US tonight if you want to purchase. Will post it as STARTT 3D printer for parts by statefan12.
    S W, 2018-12-18 03:21:53 +00:00
  6. (You must log in or sign up to post here)

Report Post

Write your reason

Log in | Sign up
Terms & Conditions!
Help!