Sinterit Lisa

£ 6,700 Tax incl. (tax excl.: £ 5,583.33)

Available for order. Delivery in a weeks

- +

Bringing powder based SLS printing to the desktop, the Sinterit Lisa opens up a whole world of opportunities in 3D printing. Print otherwise impossible objects with no support, and utilise the entire build volume by stacking parts. Perfect for prototyping and product design.

More details

Product Details Back to top

iMakr's Verdict

The Sinterit Lisa is a breakthrough in desktop 3D printing. Using Selective Laser Sintering technology, powder is loaded into a feed bed and spread layer by layer onto the build platform. The build chamber is heated to warm the powder, and a laser etches the powder in a similar way to SLA. The powder holds the print in place, removing the need for support material, and increasing the design freedom of the part.

Key Features
  • Powder based printing: SLS printing is new to the desktop market and used a laser to melt powder particles together to form solid objects.
  • Support free: Print complex objects with no support structure.
  • Batch printing: Utilise the full volume of the print area by stacking parts without needing them to touch.

Whats in the Box

  • Sinterit Lisa SLS 3D printer.
  • Print removal box.
  • Powder scoop.
  • Sinterit Lisa manual.
  • USB stick with Sinterit Studio software.
  • Sinterit Studio manual.

Printing Tips
  • Gloves and a respirator are required for working with powdered plastic.
  • Parts require cleaning after printing, this can be done using an air compressor and blow gun, sandblasting or brushes and metal tools.
  • Sand blasting can be used to clean parts but may destroy fragile parts.
  • Printed parts may be very delicate if they are too thin.
  • Printed parts may warp due to cooling if printed parallel to the print bed, rotate parts to avoid this.
  • Some powder can be reused using a sieve, but printing with old powder may cause weak brittle prints if it is not refreshed properly.

Technical Specifications Back to top

Manufacturer Sinterit
Recommended min. wall thickness 0.8 mm
Powder Diameter 20 - 100 microns
Build Volume W x D x H (mm) // W x D x H (inch) 110 x 150 x 130 mm // 4.33 x 5.90 x 5.12 inch
Manufacturer Sinterit
Printing Temperature 190°C Max.
Printing Technology SLS
Weight 35 kg // 77.16 lb
Light Source Class iv infrared laser, 5w, 808nm
Material type PA12 powder, TPU powder
Special Features Built in camera
Layer Thickness (microns) 75 - 175 microns
Platform Levelling Automatic powder spreading
Dimensions 650 x 550 x 400 mm // 25.6 x 21.65 x 15.75 inch
Print Speed Guideline 10 mm/hr in Z-direction, depending on model and material
Connectivity USB
Slicing Software Sinterit Studio
File Input Format STL
Power Supply 220-240 vAC, 50Hz, 7A // 100-130 vAC, 60Hz, 15A
Software Compatibility Windows

We recommend the following products Back to top