- -10%
EnvisionTEC E-Dent 400 MFH
The E-Dent 400 MFH resin is a biocompatible Class IIa and FDA-approved resin to produce the best possible crowns and bridges. The material can also be used for the printing of tough veneers that can be printed more precisely with fine surface finish.
Material Properties
| Description | Value |
|---|---|
| Brookfield Viscosity at 23° C | 0.9 - 1.4 Pa's |
| Flexural Strength | 85 MPa |
| Flexural Modulus | 2.100 Mpa |
| Water sorption | 30 ÎĽg/mm3 |
| Water solubility | 5 ÎĽg/mm3 |
| Hardness Shore | D 89-90 |
You might also like
The EnvisionTEC E-Dent 400 Series is designed for the accurate printing of crowns and bridges.