Filament by Brand
Please select your preferred brand on the left for a brand specific selection.
€25.00
PolyWood™ 1.75mm
€41.67
PolySmooth™ 1.75 mm
€37.50
INTAMSYS PEEK 1.75mm 1kg
€650.00
3D4Makers PEI 1010
€195.83
3D4Makers PPSU
€87.50
3D4Makers PCL 100 750g
€107.50
3D4Makers Ortho 750g
€74.17
Polymaker PolyMax PLA 1.75mm
€37.50
PolyMax™ PLA is a 3D printing material with excellent mechanical properties and printing quality. PolyMax™ PLA has an impact resistance of up to nine times that of regular PLA, and better overall mechanical properties than ABS.
PolyWood™ 1.75mm
€41.67
PolyWood™ is a wood mimic printing material that contains no actual wood ensuring a clean Jam-Free™ printing experience.
Polymaker PolySupport Breakaway 1.75mm
€41.67
PolySupport™ is a material designed to solve one of the most intimidating problem in desktop FDM/FFF 3D printing: support. PolySupport™ generates support structures that can be easily removed by hand.
PolySmooth™ 1.75 mm
€37.50
Get rid of ridges on your prints with PolySmooth filament. Designed to be used with the PolySher, this PVB filament is lightly dissolved by Isapropanol or ethanol removing the layer lines. This process is automated in the PolySher creating a mist of Isopropanol which evenly coats the whole print.
INTAMSYS ABS I 1.75 mm 1kg
€32.50
Intamsys ABS filament is designed specifically for desktop FDM/FFF 3D printing. It offers superior printing quality, excellent mechanical strength and heat resistance, with moderate printing temperatures and great warping resistance.
INTAMSYS PEEK 1.75mm 1kg
€650.00
Polyether Ether Ketone (PEEK) PEEK polymers are obtained by step-growth polymerization. PEEK is a semicrystalline thermoplastic with excellent mechanical and chemical resistance properties that are retained to high temperatures. PEEK is regarded as one of the highest performing engineering thermoplastics in the world. PEEK is used to fabricate items used in demanding applications in aerospace, automotive, oil and gas and medical industries.
3D4Makers PEI 1010
€195.83
PEI is a high performance thermoplastic wither outstanding strength and thermal stability. It is often used for structural parts due to its high strength to weight ratio.
3D4Makers PPSU
€87.50
PPSU is a high performance thermopolymer with good resistance to certain chemicals and good resistance to temperature.
3D4Makers PCL 100 750g
€107.50
PCL is a low temperature biodegradeable plastic commonly used for experimental long term medical implanting as a result of its slow degradation.
3D4Makers Ortho 750g
€74.17
A world first, specially designed for orthotics. Facilan Ortho is great for adhesion to leather and textiles.