EnvisionTEC | Photosilver

The EnvisionTEC Photosilver resin is ideally used to produce 3D printed models for the Jewellery Industry, the Entertainment Industry or in the manufacturing of consumer goods.


(€404.17 per kilo)

Tax included

Compare now

The EnvisionTEC Photosilver Resin

The EnvisionTEC Photosilver resin is a ceramic filled photopolymer material, designed for use on the EnvisionTEC range of 3D printers. The material helps to produce highly detailed parts with crisp features. The resin is high temperature resistent which allows for the production of vulcanised rubber molds without breaking or melting the master pattern. The material allows for improved definition of model detail compared to other filled materials, this is due to the increased number of ceramic nanoparticles in the resin. The Photosilver material can produce high detail models straight from the machine, without any need for finishing. Because of this, the material can be used directly for molding using conventional techniques and materials.

Material Properties
Hardness Shore D85
ASTMS MethodDescriptionValue
D638 Tensile Strength 32 MPa
D638 Tensile Modulus 1450 MPa
D638 Elongation at Break 7%
D790 Flexural Strength 65 MPa
D790 Flexural Modulus 1700 MPa
D2240 Hardness Shore D 81
D648 Heat Deflection Temperature 0.45 MPa at 45-60° C and 1.82 MPa at 37-45° C
D256 Izod Impact - Notched 28 J/m

Data sheet

Heat Deflection Temperature
0.45 MPa at 45-60° C and 1.82 MPa at 37-45° C
Tensile Strength
32 MPa
Tensile Modulus
1450 MPa
Flexural Strength
65 MPa
Flexural Modulus
1700 MPa
Shore D hardness

Specific References

You might also like

Compare now

EnvisionTEC | R5

Compare now

EnvisionTEC | R11