25 € Tax incl. (tax excl.: 20,84 €)
In stock. Dispatch within 48 hours.
Carbon Fiber PLA is an "Exotic" filament and are demonstrably more rigid, providing excellent structural strength and layer adhesion with very low warpage. It has a beautiful matte black finish with a slight sheen due to the embedded carbon.
What is it made out of?
Proto-pasta Carbon Fiber PLA is made from NatureWorks 4043D PLA Resin compounded with 15% (by weight) chopped Carbon Fibers. It is more brittle than standard PLA in its filament form, so handle it carefully to prevent breakage.
Abrasive Exotics are not for Everyone!
Carbon Fiber filaments include materials which, even when finely ground, will increase the wear on your printer nozzle if your nozzle is made of a “soft” metal, like brass. After printing 500 g of filament or more, you will begin to notice a gradual increase in brass nozzle diameter, and will eventually have to replace your printer nozzle. Exotics made by other manufacturers, including wood filled, metal filled, and some glow in the dark materials, are also more abrasive than standard PLA. We are of the mindset that replacing a nozzle every two or three months is worth it to print metal and other advanced materials on our 3D printers, but not everyone wants to replace their nozzles more than absolutely necessary, and some machines are not easily serviceable. For this reason, these types of materials are not for everyone.
Recommended printing at 190C-210C using a 0.5mm nozzle and direct-drive spring loaded pinch-roll style extrusion head.
Product weight: 250g.
|Filament Diameter (mm)||1.75mm|
|Weight||250g of filament|