Moai 130 SLA printer - Kit Version
This Moai 130 kit bundle features:
- Moai SLA machine
- FEP film VAT
- Easy-to-Level Build Plate
- Heater Module
- UV Curing Light
The Moai SLA 3D printer offers high precision prints that FDM machines simply cannot achieve. The spot size on the Moai is only 70 microns and is mechanically capable 5-micron layer height resolution. It also runs on a processor that permits the machine to print at extremely fast speeds without sacrificing that superior resolution. The included add-ons and upgrades offer any user the easiest SLA printing experience at the most affordable cost on the market. Although this kit does not include resin, the Moai has an open source system and compatible with a huge range of resins that may be needed for applications. Check out the Peopoly Moai community of users for support, samples, and questions!
This Moai kit is a great stepping stone for users looking to transition from FDM printing to SLA printing or for professionals looking for better quality prints. Designed to give users an opportunity to learn and become more familiar with the inner workings of the 3D printer, the Moai kit is easy to put together and only takes about 5 hours to fully build.
The FEP film VAT for the Moai kit is a full metal build that offers more durability than the standard PDMS vat. FEP film is easy to replace at a low cost and helps resin remain in a liquid state. This FEP vat ultimately reduces cleaning and saves so much resin and is immediately ready to slide into place!
The easy-to-level build plate for the Moai kit is the best module for simple levelling of your Moai 3D printer. It is full metal and designed to use with both FEP and PDMS vats. Uneven build platforms will ruin your prints every time, so take the stress out of calibration with this special build plate.
The Peopoly UV Curing Light is a UV LED for the cure of 3D printed resin parts. Those 6 high power UV LED speed up post-processing by curing 5cm of resin within 10 seconds only. Solidify photosensitive resin quickly and efficiently straight off your Moai printer with this accessory.
The heater module designed for the Moai printer effectively protects the viscosity of any remaining resin in the vat from a cool environment that may affect material adhesion or curing during printing. By keeping the temperature range between 27C-35°C, users can alleviate potential errors and maintain consistent and high-quality prints from your Moai printer.
- Printing Technology
- Build Volume W x D x H (mm) // W x D x H (inch)
- 130 x 130 x 180 mm
- Layer Thickness / Print Precision
- 0.01 - 0.2 mm
- 405 nm
- Liquid Photopolymer, open source
- 330 x 340 x 660 mm
- Operating System
- Windows, Mac, Linux
- Layer resolution
- 70 microns
- SD card [FAT16, max 2 GB]
- Input Voltage / Power