TO USE: Simply loosen the 4 screws on the build plate, lower it to the vat and then tighten the screws up. It\'s as easy as that.
The Peopoly UV Curing Light is a UV LED for the cure of 3D printed resin parts. Those 6 high power UV LED speed up post-processing by curing 5cm of resin within 10 seconds only. Solidify photosensitive resin quickly and efficiently with the Peopoly UV Curing Light.
Due to the intensity of UV light output, the user must wear eye protection or their eyes will feel strained after extended exposure.
- Size: 115 x 87 x 76 mm
- Power Input: AC 85V-260V, 290mA
- Weight: 0.5kg
- Light Output: 60W Mecury Lamp
Peopoly recommends that prints be cured at least 30 minutes of post-curing via UV light with printed object submerged in water.
Tensile Strength: 38Mpa
Shore D Hardness: 84
Young’s Modulus: 1500Mpa
Elongation At Break: 27%
Clean with 95% Ethanol