Dispatch within 6-8 weeks
How does SLS technology work?
Using Selective Laser Sintering technology, powder is loaded into a feed bed and spread layer by layer onto the build platform. The build chamber is heated to warm the powder, and a laser etches the powder in a similar way to SLA. The powder holds the print in place, removing the need for support material, and increasing the design freedom of the part.
|Recommended min. wall thickness||from 0.4 mm (0.015 in.)|
|Material||Refresh ratio: from 0-50% depending on the material|
|Material type||Powder PA11, Powder PA12 smooth, Powder Flexa black, Powder Flexa gray, Nitrogen use materials|
|Z-axis Layer Thickness||[min-max]: 0.075-0.175 mm (0.003-0.007in.)|
|Dimensions||690 x 500 x 880 mm (27.1 x 19.7 x 34.6 in.)|
|Special Features||LCD capacitive colour screen, Built-in camera|
|Build Plate||150 x 200 x 260 mm (5.9 x 7.9 10.2 in.)|
|Diameter Tolerance||from 0.5mm (0.019 in.)|
|XY Positioning Accuracy||from 0.05 mm (0.02 in.)|
|Printer volume WxDxH (mm) // WxDxH (inch)||[Max Diagonally]: 316mm (12.4 in)|
|File Format||STL, OBJ, 3DS, FBX, DAE, 3MF|
|Connectivity||Wifi, USB port|
|Printer Software||Sinterit Studio 2018|