• Moai 130 SLA printer - Kit Version

Moai 130 SLA printer - Kit Version

The Moai 130 SLA printer kit is a total package of tools needed to get started 3D printing immediately. This kit version offers the same high-quality prints and experience, except also allows users to become familiar with the in's and out's of their printer. The Moai is all about flexibility, performance, and affordability, offering better resolution than Formlabs at a fraction of the price.


This Moai 130 kit bundle features:

  • Moai SLA machine
  • FEP film VAT
  • Easy-to-Level Build Plate
  • Heater Module
  • UV Curing Light
$1,523.16
Tax included
Quantity
Available to order. Dispatch in 2-3 weeks.

Compare now

iMakr Verdict:


The Moai SLA 3D printer offers high precision prints that FDM machines simply cannot achieve. The spot size on the Moai is only 70 microns and is mechanically capable 5-micron layer height resolution. It also runs on a processor that permits the machine to print at extremely fast speeds without sacrificing that superior resolution. The included add-ons and upgrades offer any user the easiest SLA printing experience at the most affordable cost on the market. Although this kit does not include resin, the Moai has an open source system and compatible with a huge range of resins that may be needed for applications. Check out the Peopoly Moai community of users for support, samples, and questions!    

This Moai kit is a great stepping stone for users looking to transition from FDM printing to SLA printing or for professionals looking for better quality prints. Designed to give users an opportunity to learn and become more familiar with the inner workings of the 3D printer, the Moai kit is easy to put together and only takes about 5 hours to fully build. 


Key Features:

  • Large SLA build volume of to 13 x 13 x 18 cm
  • Professional grade UV laser with a 70 microns spot size running at 405 nm (microns) wavelength and a maximum power of 150 mW

  • Full access to laser setting,  including power level, exposure time and galvo (mirror galvanometer) travel speed

  • Moai uses standard Gcode for printing via SD flash card making the printing process transparent

  • Open Source Material: The user can use almost any UV resin designed for 405 nm wavelength

  • Upgradable and customizable – designed so that the user can easily swap new parts to upgrade or add functionality. There are plenty of areas in Moai system designed for user customization
Peopoly Moai 3D Resin Print

INTRODUCING: the Moai 130 SLA printer


The extras:

Peopoly Moai FEP Film vat
FEP Film Vat

The FEP film VAT for the Moai kit is a full metal build that offers more durability than the standard PDMS vat. FEP film is easy to replace at a low cost and helps resin remain in a liquid state. This FEP vat ultimately reduces cleaning and saves so much resin and is immediately ready to slide into place!
Peopoly Moai Easy-to-Level Build Plate
Easy-to-Level Build Plate 

The easy-to-level build plate for the Moai kit is the best module for simple levelling of your Moai 3D printer. It is full metal and designed to use with both FEP and PDMS vats. Uneven build platforms will ruin your prints every time, so take the stress out of calibration with this special build plate.

Peopoly Moai UV Curing Light
UV Curing Light

The Peopoly UV Curing Light is a UV LED for the cure of 3D printed resin parts. Those 6 high power UV LED speed up post-processing by curing 5cm of resin within 10 seconds only. Solidify photosensitive resin quickly and efficiently straight off your Moai printer with this accessory.

Peopoly Moai Heater Module
Heater Module

The heater module designed for the Moai printer effectively protects the viscosity of any remaining resin in the vat from a cool environment that may affect material adhesion or curing during printing. By keeping the temperature range between 27C-35°C, users can alleviate potential errors and maintain consistent and high-quality prints from your Moai printer.

Data sheet

Printing Technology
Stereolithography
Build Volume W x D x H (mm) // W x D x H (inch)
130 x 130 x 180 mm
Layer Thickness / Print Precision
0.01 - 0.2 mm
Wavelength
405 nm
Material
Liquid Photopolymer, open source
Dimensions
330 x 340 x 660 mm
Operating System
Windows, Mac, Linux
Layer resolution
70 microns
Connectivity
SD card [FAT16, max 2 GB]
Input Voltage / Power
220VAC

Specific References

You might also like