iMakr Shop
INTAMSYS Funmat HT Enhanced 110v
$7,499.00
The new second generation Funmat HT is a must-have for anyone who prints real and strong functional parts. In addition to the new autolevelling funtion, the HT comes with the necessities--active heated chamber, high nozzle temperature and heated build plate--that let you print all types of technical materials from PEEK/PEI/PPSU to Nylon/PC to ABS/PLA.Â
- -10%
3D4Makers PEEK 200g
$179.10
-10%
$199.00
PEEK is a high performance thermopolymer resistant to high temperatures and many chemicals. It is a common injection moulding plastic for industrial applications where high strength and low weight are desirable.
- -10%
3D4Makers PEI 750g
$161.25
-10%
$179.17
PEI is a high performance thermoplastic wither outstanding strength and thermal stability. It is often used for structural parts due to its high strength to weight ratio.
- -10%
3D4Makers PEI 500g
$157.50
-10%
$175.00
PEI is a high performance thermoplastic wither outstanding strength and thermal stability. It is often used for structural parts due to its high strength to weight ratio.
- -10%
3D4Makers PEI 200g
$76.50
-10%
$85.00
PEI is a high performance thermoplastic wither outstanding strength and thermal stability. It is often used for structural parts due to its high strength to weight ratio.
- -10%
3D4Makers PPSU 750g
$239.25
-10%
$265.83
PPSU is a high performance thermopolymer with good resistance to certain chemicals and good resistance to temperature.
- -10%
3D4Makers PPSU 500g
$193.50
-10%
$215.00
PPSU is a high performance thermopolymer with good resistance to certain chemicals and good resistance to temperature.
- -10%
3D4Makers PPSU 200g
$74.25
-10%
$82.50
PPSU is a high performance thermopolymer with good resistance to certain chemicals and good resistance to temperature.
- -10%
3D4Makers PCL 100 750g
$121.50
-10%
$135.00
PCL is a low temperature biodegradeable plastic commonly used for experimental long term medical implanting as a result of its slow degradation.
- -10%
3D4Makers PCL 99 750g
$63.75
-10%
$70.83
PCL is a low temperature biodegradeable plastic commonly used for experimental long term medical implanting as a result of its slow degradation.
- -10%
3D4Makers ASA 750g
$31.50
-10%
$35.00
ASA has similar mechanical properties to ABS but better resistance to harsh conditions making it ideal for use outdoors. Parts made have good impact resistance over a range of temperatures and good resistance to chemicals and heat.
- -10%
3D4Makers PEEK 500g
$377.10
-10%
$419.00
PEEK is a high performance thermopolymer resistant to high temperatures and many chemicals. It is a common injection moulding plastic for industrial applications where high strength and low weight are desirable.
Smart Fan Upgrade Kit for BCN SIgma 2017
$62.50
Smart fan upgrade kit for BCN Sigma R17. Designed for customers with A BCN Sigma with the last four digits of the serial number lower than XXX.YYMMDD.1146. The kit provides quieter cooling with smarter operation.
BCNozzle for SIGMA 0.5mm (High Performance Hot End)
$55.00
0.5mm High Performance Hot End for the BCN3D Sigma. Features a hardened stainless steel nozzle for imrpoved abrasion resistance.