LOCTITE 3D | IND147 HDT230 High Heat

The LOCTITE 3D IND147 HDT230 High Heat is a durable resin, created for the use in tooling and molding applications. This material is very heat resistant. The LOCTITE 3D IND147 HDT230 is available in black.

$335.00
Tax excluded
Size
Quantity

Compare now

Henkel Loctite Logo

The LOCTITE 3D IND147 HDT230 High Heat

The IND147 HDT230 is a tough resin with high temperature resistance, perfect for tooling and molding applications. The material is stable with a great surface finish and can withstand mechanical stresses.

Key Features

  • High Heat Deflection Temperature
  • Tough with goos dimensional stability
  • Good surface finish
Mechanical PropertiesMethodGreenDymax 5000 (10 min. per side)Dymax 5000 (10 min. per side) 170°C for 3 hours
Tensile Stress at Break ASTM D638 30.7 ± 1.6 MPa 75 ± 2.0 MPa 84 ± 4.7 MPa
Young's Modulus ASTM D638 1150 ± 137 MPa 3192 ± 35MPa 3285 ± 131MPa
Elongation at Failure ASTM D638 5.9 ± 1.7 % 3.0 ± 0.1 % 3.2 ± 0.3 %
Flexural Stress at Yield ASTM D790 68 ± 3 MPa 130 ± 11 MPa 126 ± 11 MPa
Flexural Modulus ASTM D790 2053 ± 189 3835 ± 131 MPa 3926 ± 51 MPa
Flexural Strain at Break ASTM D790 7.6 ± 2.7 % 3.1 ± 0.4 % 3.2 ± 0.3 %
Thermal PropertiesMethodGreenDymax 5000 (10 min. per side)Dymax 5000 (10 min. per side) 170°C for 3 hours
HDT at 0.455 MPa DMA Internal 56.1° C 140° C 237° C
HDT at 1.82 MPa DMA Internal 111° C 166.7° C
HDT at 0.455 MPa VICAT ASTM D648 230.6° C
HDT at 1.82 MPa VICAT ASTM D648
Coefficient of Thermal Expansion (25 - 200° C) ASTM E831 114μm/m-°C 106μm/m-°C
Other PropertiesMethodGreenDymax 5000 (10 min. per side)Dymax 5000 (10 min. per side) 170°C for 3 hours
Durometer (Shore D, 0 sec) ASTM D2240 94D 94.5D
IZOD Impact Strength ASTM D256 14.6 J/m 14.5 J/m
Water Absorption (24 hr) ASTM D570 0.25 %
Solid Density ASTM D792 1.246 g/cm³ 1.262 g/cm³
Shrinkage by Density ASTM D792 8.25 % 9.64 %
Liquid PropertiesMethodGreenDymax 5000 (10 min. per side)Dymax 5000 (10 min. per side) 170°C for 3 hours
Viscosity at 25° C ASTM D7867 2105 ± 200 cP
Liquid Density ASTM D1475 1.15 g/mL

Data sheet

Young’s Modulus (MPa)
30.7 ± 1.6 MPa

Specific References

You might also like

Compare now

Asiga MAX

$11,300.00
Compare now

Asiga MAX X

$10,300.00