Moai 3D Printers
In late 2015 Peopoly sought to create a laser-based SLA printer that creates high-resolution prints, but is affordable and accessible to everyone. The result was Moai, an easily-assembled, beginner-friendly printer. With the Moai's ability to use many resins, and its low price, users will find many reasons to love this printer. iMakr are proud to offer this easy gateway into the wide world of SLA printing.
This Moai 130 kit bundle features:
- Moai SLA machine
- FEP film VAT
- Easy-to-Level Build Plate
- Heater Module
- UV Curing Light
The Moai 200 SLA Printer is the first of its kind, providing a huge build volume with amazing features at a fraction of the price. It has one of the largest build sizes for SLA printing at 200 x 200 x 250 mm. The Moai 200 is a true forerunner-- making large format and professional SLA printing available to everyone. Use any material desired for your applications on your Moai.
The Moai 3D printer is the best value SLA solution for everyone. Providing remarkable printing resolution, as other professional SLA printers at a fraction of the price, the Moai is all about flexiblity, performance, and affordability. Use any material desired for your applications on your Moai.
The assembled full pack gives you the same great features of the Moai printer but comes fully assembled, with resins and training.
Peopoly recommends that prints be cured at least 30 minutes of post-curing via UV light with printed object submerged in water.
Tensile Strength: 38Mpa
Shore D Hardness: 84
Young’s Modulus: 1500Mpa
Elongation At Break: 27%
Clean with 95% Ethanol
The best module for simple levelling of your Moai 3D printer, this easy-to-level build plate is full metal and designed to use with both FEP and PDMS vat.
TO USE: Simply loosen the 4 screws on the build plate, lower it to the vat and then tighten the screws up. It\'s as easy as that.
Due to the intensity of UV light output, the user must wear eye protection or their eyes will feel strained after extended exposure.
- Size: 115 x 87 x 76 mm
- Power Input: AC 85V-260V, 290mA
- Weight: 0.5kg
- Light Output: 60W Mecury Lamp