The best module for simple levelling of your Moai 3D printer, this easy-to-level build plate is full metal and designed to use with both FEP and PDMS vat.
TO USE: Simply loosen the 4 screws on the build plate, lower it to the vat and then tighten the screws up. It\'s as easy as that.
Due to the intensity of UV light output, the user must wear eye protection or their eyes will feel strained after extended exposure.
- Size: 115 x 87 x 76 mm
- Power Input: AC 85V-260V, 290mA
- Weight: 0.5kg
- Light Output: 60W Mecury Lamp
Peopoly recommends that prints be cured at least 30 minutes of post-curing via UV light with printed object submerged in water.
Tensile Strength: 38Mpa
Shore D Hardness: 84
Young’s Modulus: 1500Mpa
Elongation At Break: 27%
Clean with 95% Ethanol