Keep your filaments moisture free with the Eureka Filament Storing Dry Box: a hassle free, plug and play solution to your filament storing needs. Simply plug in the cabinet, add your filament and print. The controlled environment protects filament in the long term and reduces nozzle clogging and print failure due to moisture.

The xCURE from Nexa3D is the perfect post-curing solution to ensure you achieve optimum material properties. Designed to cure an entire build volume from the Nexa3D NXE 400 in one go. Featuring three curing modes; UV only, Heat only and UV + Heat and pre-set individual resin curing profiles, the Nexa3D xCURE is the perfect solution for post curing your parts.

The VENTO drying unit by 3ntr prevents filament damage caused by humidity, storing polymers in the perfect environment for performance.

The Otoflash G171 is used for curing of light-curable resins through light-induced photopolymerization. It is optimised for quick curing of medical grade 3D Printed materials using Nitrogen. Featuring two bottom mounted flash lamps operating at 10 flashes per second, it is ideal for curing otoplasties and hearing aids.

The Peopoly UV Curing Light is a UV LED for the cure of 3D printed resin parts. Those 6 high power UV LED speed up post-processing by curing 5cm of resin within 10 seconds only. Solidify photosensitive resin quickly and efficiently with the Peopoly UV Curing Light.

Due to the intensity of UV light output, the user must wear eye protection or their eyes will feel strained after extended exposure.

Key features:

• Size: 115 x 87 x 76 mm
• Power Input: AC 85V-260V, 290mA
• Weight: 0.5kg
• Light Output: 60W Mecury Lamp

Speed up and optimise your sintering workflow and keep your workspace clean with the ATEX and Intertek certified Vacuum Cleaner from Sinterit. This compact cleaner can quickly remove up to 99% of unused powder from your SLS printer so you can minimise powder change times and maximise your printing output. Includes a complete set of accessories for vacuuming your printer, and your workspace.

Includes Free Shipping.

Nexa3D xWASH is a post-processing washing station designed specifically to clean resin parts from the Nexa3D NXE 400. You can wash two entire build volumes simultaneously thanks to the xWASH large capacity. Choose to wash your parts while still attached to the build volume or as individual parts in the basket. With a simple, user friendly interface to help set parameters such as timer length, agitation speed and direction, the Nexa3D xWASH is a powerful and consistent part washing solution.

Complete your 3ntr 3D printing experience with STORM, designed to hold up to 3 VENTO units and a 3ntr HEPA/VOC filtering unit for a safer printing environment. 

Spacious inside, but with a relatively small footprint, the Sandblaster XL from Sinterit is perfect for cleaning up and processing large-sized SLS printed parts.

Includes Free Shipping.

The Loctite 3D Printing EQ CL36 LED Cure Chamber is a high performance LED system for curing UV resins. Featuring multidirectional 405nm UV light and a rotating turntable for uniform curing. Designed to achieve optimal results and finish for all engineering resins.