Zortrax Apoller Smart Vapor Smoothing
Achieve automatic post-processing with the Zortrax desktop smart vapor smoothing machine. Produce the look of an injection moulded part from your FDM prints. The Smart Vapor Smoothing technology evenly smooths out all surfaces including all complex geometries and interlocking or movable parts. Ideal for small to medium production runs.
Free Shipping on orders over £75
Free lifetime remote support on all products
Zortrax Apoller Smart Vapour Smoothing
Automatic post-processing with the Zortrax desktop smart vapor smoothing device. Ideal for low to medium production runs. Achieve the look of an injection moulded part from your FDM prints with the industrial performance managed by the proprietary algorithms.
Three Simple Steps
Print- Print parts on any FDM, FMM or LPD 3D Printer. Smooth- Place parts in the chamber and select the smoothing option. Relax- After 3 hours your parts are ready!
Smart Vapour Smoothing Technology
Smart Vapor Smoothing technology evenly smooths out all surfaces including all complex geometries and interlocking or movable parts. This is achieved by the automatic management of temperature, pressure and solvent concentration in the smoothing chamber. See below for a part before Apoller vapor smoothing and after.
Advance Vapor Circulating System
The vapours are circulated upwards to evenly coat the parts. The Apoller Smart Vapor Smoother uses less solvent for any fragile or intricately detailed parts to ensure they remain in tact. Once its finished, the condensation system retrieves the excess solvent for reuse.
Speed and ease of use- Fully automated smoothing process with machine set up taking only 3 hours.
SVS technology- Smart Vapor Smoothing is the Zortrax proprietary technology for automatic vapor smoothing.
Consistent results- All parts are evenly smoothed time and time again. With no limitations on size or geometry.
Compatibility- Acetone and MEK are used to smooth models produced on FDM, FFF, LDP 3D printers in ABS, HIPS or ASA based filaments.
- Internal Chamber Dimensions
- 300 x 250 x 250 mm (11.8 x 9.8 x 9.8 in)
- Operating Temperature
- -20° C (-4° F) to 90° C (194° F)
- Operating System
- Power Supply
- 24 V DC @ 21 A, 500 W
- Compatible materials
- Can be used on: ABS, ASA, HIPS
- Compatible materials
- SOLVENT: Pure Acetone or pure MEK only | ZORTAX: Z-ABS, Z-ULTRAT, Z-ULTRAT Plus, Z-ASA Pro, Z-HIPS
- AC input
- 110 V ~ 13.6 A 50/60 Hz ; 240 V ~ 6.3 A 50/60 Hz
- Wi-Fi, Ethernet, USB