Filament til FFF / FDM

3D-print med filament som råmateriale kendes også som Fused Deposit Modelling (FDM) og Fused Filament Fabrication (FFF).

Råmaterialet, der er på fast form (tråd eller filament), smeltes til slutproduktet ved ekstrudering gennem en dyse. I praksis betyder det, at der med FDM / FFF teknologi kan 3D-printes med traditionelle materialer som fx ABS og nylon (PA), nyere materialer, der kræver høj temperatur, som fx PEEK og PEI og mange flere.

  • Show Sidebar

Aktive filtre

3DXTech CarbonX™ CF PEKK-A 1.75mm 500g

2.064,00 kr.

CarbonX CF PEKK-A by 3DXTech is a carbon fibre-filled material that has properties comparable to PEEK, but is significantly easier to print. A great PEEK alternative which is ideal for industries such Automotive, Aerospace and Gas + Oil.

Anisoprint - Smooth PA - 750g

812,00 kr.

Smooth PA is a carbon fiber-filled polyamide filament by Anisoprint. Smooth PA is used specifically for the exterior of a part to create a stronger shell and display a matte look with a sleek surface.

Anisoprint CFC PA 1,75mm 750g

796,00 kr.

CFC PA by Anisoprint is specifically designed to be used with their continuous fiber co-extrusion process (CFC). This premium polyamide filament has a low moisture absorption rate and lower viscosity for improved co-extrusion with carbon fiber strands.

Apium PEEK 450 1,75mm 500g

2.232,00 kr.

Apium PEEK 450 filament is a highly resistant, semi-crystaline thermoplastic material. It is ideal for applications requiring thermal, chemical, and mechanical exceptional conditions. Industries like Automotive, Aerospace, Medical, Electronics, and Oil & Gas use this material for its excellent characteristics.

Apium CFR PEEK 450 1,75mm 500g

2.396,00 kr.

Carbon Fiber Reinforced PEEK from Apium, is a material formulated with Carbon Fibers and PEEK. Its high thermal conductivity, enabled thanks to its specific formulation, made CFR PEEK an ideal material for a variety of industries as aerospace or electronic. Create functional prototyping, end-use parts or material development with the CFR PEEK material.

Apium PEI 9085 1,75mm 500g

1.164,00 kr.

The filament PEI 9085 from Apium is an engineering plastic material that offers high strength resistance. Its properties, similar to PEEK\'s gives you a significant advantage on your production at an affordable price. PEI filament is the solution for applications in aircraft, electronics and automotive industries.

Apium PVDF 1000 White 1,75mm 500g

876,00 kr.

The PDVF 1000 filament material from Apium is the solution for Oil and Gas industries. This homopolymer with medium viscosity offers high chemical resistance up to 149°C. Its excellent characteristics enable the print of challenging applications where long-term resistance and corrosion prevention are important. 

Cubicon PLA 1.75mm Cubicon PLA 1.75mm
  • På tilbud!

Cubicon PLA 1.75mm

344,00 kr.

PLA (Polylactic Acid) is an environmentally friendly thermoplastic polymer, more specifically from corn starch or sugar cane. It tends to naturally break down in about three to six months. PLA can also deform at a high temperature. Outside of 3D printing, PLA is also used to produce parts and prototypes like medical implants, food packaging, and disposable tableware.