LOCTITE 3D | IND147 HDT230 High Heat

    The Henkel LOCTITE 3D IND147 HDT230 High Heat is a durable resin, created for the use in tooling and molding applications. This material is very heat resistant. The LOCTITE 3D IND147 HDT230 is available in black.

    1.976,00 kr.
    Ekskl. moms
    Størrelse
    Antal

     

     

    Spørg os om vores rabatter til uddannelse

    Henkel Loctite Logo

    The LOCTITE 3D IND147 HDT230 High Heat

    The IND147 HDT230 is a tough resin with high temperature resistance, perfect for tooling and molding applications. The material is stable with a great surface finish and can withstand mechanical stresses.

    Key Features

    • High Heat Deflection Temperature
    • Tough with goos dimensional stability
    • Good surface finish
    Mechanical PropertiesMethodGreenDymax 5000 (10 min. per side)Dymax 5000 (10 min. per side) 170°C for 3 hours
    Tensile Stress at BreakASTM D63830.7 ± 1.6 MPa75 ± 2.0 MPa84 ± 4.7 MPa
    Young's ModulusASTM D6381150 ± 137 MPa3192 ± 35MPa3285 ± 131MPa
    Elongation at FailureASTM D6385.9 ± 1.7 %3.0 ± 0.1 %3.2 ± 0.3 %
    Flexural Stress at YieldASTM D79068 ± 3 MPa130 ± 11 MPa126 ± 11 MPa
    Flexural ModulusASTM D7902053 ± 1893835 ± 131 MPa3926 ± 51 MPa
    Flexural Strain at BreakASTM D7907.6 ± 2.7 %3.1 ± 0.4 %3.2 ± 0.3 %
    Thermal PropertiesMethodGreenDymax 5000 (10 min. per side)Dymax 5000 (10 min. per side) 170°C for 3 hours
    HDT at 0.455 MPa DMAInternal56.1° C140° C237° C
    HDT at 1.82 MPa DMAInternal111° C166.7° C
    HDT at 0.455 MPa VICATASTM D648230.6° C
    HDT at 1.82 MPa VICATASTM D648
    Coefficient of Thermal Expansion (25 - 200° C)ASTM E831114μm/m-°C106μm/m-°C
    Other PropertiesMethodGreenDymax 5000 (10 min. per side)Dymax 5000 (10 min. per side) 170°C for 3 hours
    Durometer (Shore D, 0 sec)ASTM D224094D94.5D
    IZOD Impact StrengthASTM D25614.6 J/m14.5 J/m
    Water Absorption (24 hr)ASTM D5700.25 %
    Solid DensityASTM D7921.246 g/cm³1.262 g/cm³
    Shrinkage by DensityASTM D7928.25 %9.64 %
    Liquid PropertiesMethodGreenDymax 5000 (10 min. per side)Dymax 5000 (10 min. per side) 170°C for 3 hours
    Viscosity at 25° CASTM D78672105 ± 200 cP
    Liquid DensityASTM D14751.15 g/mL

    Produktinformation

    Young’s Modul
    30.7 ± 1.6 MPa