LOCTITE 3D | IND147 HDT230 High Heat

The Henkel LOCTITE 3D IND147 HDT230 High Heat is a durable resin, created for the use in tooling and molding applications. This material is very heat resistant. The LOCTITE 3D IND147 HDT230 is available in black.

1.976,00 kr.
Ekskl. moms
Størrelse
Antal

Compare now

Henkel Loctite Logo

The LOCTITE 3D IND147 HDT230 High Heat

The IND147 HDT230 is a tough resin with high temperature resistance, perfect for tooling and molding applications. The material is stable with a great surface finish and can withstand mechanical stresses.

Key Features

  • High Heat Deflection Temperature
  • Tough with goos dimensional stability
  • Good surface finish
Mechanical PropertiesMethodGreenDymax 5000 (10 min. per side)Dymax 5000 (10 min. per side) 170°C for 3 hours
Tensile Stress at Break ASTM D638 30.7 ± 1.6 MPa 75 ± 2.0 MPa 84 ± 4.7 MPa
Young's Modulus ASTM D638 1150 ± 137 MPa 3192 ± 35MPa 3285 ± 131MPa
Elongation at Failure ASTM D638 5.9 ± 1.7 % 3.0 ± 0.1 % 3.2 ± 0.3 %
Flexural Stress at Yield ASTM D790 68 ± 3 MPa 130 ± 11 MPa 126 ± 11 MPa
Flexural Modulus ASTM D790 2053 ± 189 3835 ± 131 MPa 3926 ± 51 MPa
Flexural Strain at Break ASTM D790 7.6 ± 2.7 % 3.1 ± 0.4 % 3.2 ± 0.3 %
Thermal PropertiesMethodGreenDymax 5000 (10 min. per side)Dymax 5000 (10 min. per side) 170°C for 3 hours
HDT at 0.455 MPa DMA Internal 56.1° C 140° C 237° C
HDT at 1.82 MPa DMA Internal 111° C 166.7° C
HDT at 0.455 MPa VICAT ASTM D648 230.6° C
HDT at 1.82 MPa VICAT ASTM D648
Coefficient of Thermal Expansion (25 - 200° C) ASTM E831 114μm/m-°C 106μm/m-°C
Other PropertiesMethodGreenDymax 5000 (10 min. per side)Dymax 5000 (10 min. per side) 170°C for 3 hours
Durometer (Shore D, 0 sec) ASTM D2240 94D 94.5D
IZOD Impact Strength ASTM D256 14.6 J/m 14.5 J/m
Water Absorption (24 hr) ASTM D570 0.25 %
Solid Density ASTM D792 1.246 g/cm³ 1.262 g/cm³
Shrinkage by Density ASTM D792 8.25 % 9.64 %
Liquid PropertiesMethodGreenDymax 5000 (10 min. per side)Dymax 5000 (10 min. per side) 170°C for 3 hours
Viscosity at 25° C ASTM D7867 2105 ± 200 cP
Liquid Density ASTM D1475 1.15 g/mL

Produktinformation

Young’s Modul
30.7 ± 1.6 MPa

Du vil eventuelt også synes om