EnvisionTEC | E-Orthoshape
The EnvisionTEC E-Orthoshape is an ABS-like resin used for the production of orthodontic models.
Free lifetime remote support on all products
Ask us about our discounts for education
E-Orthoshape
The EnvisionTEC E-Orthoshape Resin is a grey ABS-like material that prints in 100 micron layers. It has affordable volume production of models on which to produce clear thermoformed aligners by orthodontic professionals.
Applications: Orthodontics
Material Properties
| Description | Value |
|---|---|
| Tensile Strength | 65 MPa |
| Tensile Modulus | 1772 MPa |
| Elongation at Break | 6.6% |
| Flexural Strength | 108 MPa |
| Flexural Modulus | 2543 MPa |
| Viscosity | 765 cP at 30° C |
Data sheet
- Tensile Strength
- 65 MPa
- Tensile Modulus
- 1772 MPa
- Flexural Strength
- 108 MPa
- Flexural Modulus
- 2543 MPa
The EnvisionTEC E-Orthoshape is an ABS-like resin used for the production of orthodontic models.