EnvisionTEC R5
EnvisionTEC has developed a wide range of materials with specific formulations for DLP technology, ensuring you high quality results.
The material R5 is a liquid pohotopolymer resin for rigid and functional prints. R5 is the ideal solution for industries as Entertainment or Consumer Goods requiring humidity and temperature resistant parts.
Free lifetime remote support on all products
Ask us about our discounts for education
The EnvisionTEC R5 Resin
The EnvisionTEC R5 resin is a liquid photopolymer that can produce robust, accurate and functional parts. This strong material is chemical restiant, offers a wide processing latitude and a high tolerance for temperature and humidity, during and after the build. The prints made with R5 resin show superior fatigue properties, strong memory retention and high quality up-facing and down-facing surfaces. This material also has a good balance of properties between rigidity and functionality.
Material Properties
| ASTMS Method | Description | Value |
|---|---|---|
| D638M | Tensile Strength | 31 - 39 MPa |
| D638M | Elongation at Break | 11 - 25% |
| D638M | Elongation at Yield | 16% |
| D638M | Modulus of Elasticity | 1245 - 1510 MPa |
| D790M | Flexural Strength | 40 - 45 MPa |
| D790M | Flexural Modulus | 1190 - 1383 MPa |
| D256A | Izod Impact - Notched | 0.2 - 0.50 J/cm |
| D2204 | Hardness Shore D | 85 |
| D570-98 | Water Absorption | 0.78% |
| D1004 | Graves Tear | 154287 N/m |
EnvisionTEC has developed a wide range of materials with specific formulations for DLP technology, ensuring you high quality results.
The material R5 is a liquid pohotopolymer resin for rigid and functional prints. R5 is the ideal solution for industries as Entertainment or Consumer Goods requiring humidity and temperature resistant parts.