Sinterit Sandblaster STD
The Sandblaster is designed for cleaning, polishing and finishing prints, using dry abrasive material. Using compressed air and small glass balls, the Sandblaster allows to check every nooks of your model and thus highlight each detail.
* Does not include an air compressor.
The post-processing of printed parts is an easy task. All you need to do is remove the powder from your printed parts. The best and cleanest solution is to use compressed air and a sandblaster machine. With this device you will clean and polish the surfaces.
4Kg of abrasive media is included, however a compressor (recommended output 290 [l/min]. Max air supply 115 [psi]) will need to be purchased separately.
- Internal Chamber Dimensions
- 410 x 310 x 200 mm (16.1 x 12.2 x 7.9 in)
- 15 kg
- 480 x 370 x 360 mm (18.9 x 14.5 x 14.1 in)
- Power Supply
- 6 W
- Input Voltage / Power
- 230 V / 50 Hz or 120 V / 60 Hz