EnvisionTEC | E-RigidForm
The EnvisionTEC E-RigidForm produces hard, stiff parts, so it is mostly used to print for prototypes and end use.
EnvisionTEC E-RigidForm
The E-RigidForm is a polyurethane-like resin that 3D prints strong, hard and stiff parts for prototypes and end-use. The high tensile strength compares to that of nylon 6 and polycarbonate. The resin has good heat deflection and water resistance and it is a versatile and though material. It has a hardness value of Shore D 87, which is the same value as a cast urethane plastic. This resin is ideal for a wide range of industrial and consumer applications.
Applications: Aerospace, Automotive, Consumer Goods, Education, Manufacturing
Material Properties
| Description | Value |
|---|---|
| Tensile Strength | 68 - 73 MPa |
| Tensile Modulus | 2950 - 3250 MPa |
| Elongation at Break | 6 - 7% |
| Flexural Strength | 120 - 126 MPa |
| Flexural Modulus | 3340 - 3570 MPa |
| Viscosity | 460 cP at 30° C |
| Hardness Shore D | 87 |
| Heat Deflection Temperature | 62.5° C |
| Impact Izod | 30 J/m |
| Water Absorption | 0.67% at 48 hours |
| Post-Processing For Results Above | UV SCU 2 X 60 min |
Data sheet
- Tensile Strength
- 68 - 73 MPa
- Tensile Modulus
- 2950 - 3250 MPa
- Flexural Strength
- 120 - 126 MPa
- Flexural Modulus
- 3340 - 3570 MPa
- Shore Hardness
- 87
The EnvisionTEC E-RigidForm produces hard, stiff parts, so it is mostly used to print for prototypes and end use.