EnvisionTEC | Photosilver

    The EnvisionTEC Photosilver resin is ideally used to produce 3D printed models for the Jewellery Industry, the Entertainment Industry or in the manufacturing of consumer goods.

    Request a quote


    Free lifetime remote support on all products


    Ask us about our discounts for education

    The EnvisionTEC Photosilver Resin

    The EnvisionTEC Photosilver resin is a ceramic filled photopolymer material, designed for use on the EnvisionTEC range of 3D printers. The material helps to produce highly detailed parts with crisp features. The resin is high temperature resistent which allows for the production of vulcanised rubber molds without breaking or melting the master pattern. The material allows for improved definition of model detail compared to other filled materials, this is due to the increased number of ceramic nanoparticles in the resin. The Photosilver material can produce high detail models straight from the machine, without any need for finishing. Because of this, the material can be used directly for molding using conventional techniques and materials.

    Material Properties
    Hardness Shore D85
    ASTMS MethodDescriptionValue
    D638Tensile Strength32 MPa
    D638Tensile Modulus1450 MPa
    D638Elongation at Break7%
    D790Flexural Strength65 MPa
    D790Flexural Modulus1700 MPa
    D2240Hardness Shore D81
    D648Heat Deflection Temperature0.45 MPa at 45-60° C and 1.82 MPa at 37-45° C
    D256Izod Impact - Notched28 J/m

    Data sheet

    Tensile Strength
    32 MPa