EnvisionTEC | Easy Cast 2.0 C

    The EnvisionTEC Easy Cast 2.0 resin is a material that is mostly used in the high-speed printing of castable models and in jewellery. The resin was developed to be exclusively printed on EnvisionTEC's patented cDLM printers.

    Request a quote


    Free lifetime remote support on all products


    Ask us about our discounts for education

    The EnvisionTEC Easy Cast 2.0 C Resin

    The Easy Cast 2.0 C resin is a breakthrough material for the high-speed 3D printing of castable models. It's a photopolymer with the highest wax content available in 3D printing today. This resin is exclusively printed on EnvisionTEC's cDLM printers. Because the cDLM technology has almost zero separation forces during printing, it allows for 90% liquid wax content in the formulation. Due to this, patterns printed in Easy Cast 2.0 C feature burnout similar to injection wax.

    Special hardeners are added to the material, allowing it to act in a similar way to EnvisionTEC's low and no-wax material, delivering crisp features, sharp corners and defined raised surfaces.

    Material Properties
    PropertyEasy Cast 2.0 C
    Viscosity200 cP at 30° C
    Density1.08 g/㎤ at 25° C
    Temperature at 5% Weight Loss263° C
    Ash Content (after 900° C)0

    Applications: Jewellery