EnvisionTEC | Press-E-Cast

    The EnvisionTEC Press-E-Cast resin is designed for the 3D printing of crowns and bridges. This material is mostly used in the dental industry.

    Request a quote


    Free lifetime remote support on all products


    Ask us about our discounts for education

    The EnvisionTEC Press-E-Cast

    The EnvisionTEC Press-E-Cast is mostly used for 3D printing in the dental industries. The resin is a wax-filled photopolymer material for the production of anatomically extremely accurate crowns and bridges and great surface finish. This material can also be used to print partial frameworks. The burnour for Press-E-Class 3D printed parts is rapid, clean and ash-free, thus leading to exact, quality castings. The EnvisionTEC Press-E-Class also delivers low thermal expansion during burnout, due to it's moderate wax content. The parts printed in this resin can be pressed into full contour ceramics.

    Applications: Dental

    Material Properties
    Tensile Strength56 MPa
    Elongation at Break3.5%
    Flexural Strength115 MPa
    Flexural Modulus3350 MPa
    Heat Deflection Temperature150° C

    Data sheet

    Tensile Strength
    56 MPa