KetaSpire PEEK HC filament has been ISO 10993 certified for limited contact (less than 24 hours contact with bodily fluids and tissue) and offers excellent long-term performance at temperatures of up to 240°C. Featuring good inter-layer adhesion and low porosity, this is a superb choice for a variety of healthcare manufacturing applications.
.png)
Why KetaSpire PEEK
- Optimal chemical resistance to organics, acids and bases
- Great wear and abrasion resistance
- Excellent fatigue resistance
- Great dimensional stability
- Superior resistance to hydrolysis in boiling water and superheated steam
- Optimal dielectric with low loss at high temperatures and frequencies
- Ease of processing
- High purity
Specifications
| Filament Diameter | 1.75mm | |
| Net Filament Weight | 0.5 or 1kg | |
| Filament Colour | beige | |
| Storage | place in zip sealed bag with desiccant after use | |
| Desiccant | Yes | |
| Processing temperature Range | 390-420C | |
| Recommended Bed Temperature | >200C | |
| Drying Conditions | 150C for at least 4 hours | |
| Density | 1.29 g/cm3 | |
| Tensile Strength at Yield | 85 MPa | |
| Tensile Elongation at Break | 26% | |
| Notched Izod Impact | 81 J/m | |
| Melt Temperature | 81 J/m |
205712
You might also like
Solvay's new high-performance KetaSpire PEEK HC is specially designed and certified for use in the Healthcare industry. Outstanding thermal properties and chemical resistance for a wide range of healthcare manufacturing applications.