Zortrax Endureal

    Zortrax Endureal industrial 3D Printer features advance thermal management for high performance polymers. The filament temperature is tightly controlled throughout the printing process in order to achieve the best precision and optimum mechanical material properties.

    Request a quote

     

    Free shipping on orders over $500 to mainland US

     

    Free lifetime remote support on all products

    logo

    Zortrax Endureal

    3rd Generation industrial 3D Printer. the Zortrax Endureal features advance thermal management for high performance polymers. The filament temperature is tightly monitored and controlled throughout the printing process in order to achieve the best precision and optimum mechanical material properties.


    Sealed filament bay

    Temperature Control System

    High Temperature Extruder- Works at sustained temperature of 480°C

    Heated Build Chamber- temperature in the build chamber can reach 200°C for engineering materials requiring high temperatures.

    Heated Build Platform- Capable of reaching 220°C to ensure parts remain stable to the platform.

    Auto Annealing- Features an automatic annealing function which can be carried out after printing has finished to achieve the highest material mechanical properties available.

    Advance Thermal Shielding- The extruder compartment is always kept a ta safe operating temperature to ensure filament transmission is uninterrupted.

    Heated Filament Compartment- Secure, closed environment for the filament spools so they can be kept at optimum printing temperature.


    Industrial Safety System

    Blackout Response System- Endureal can detect when there has been a power outage and will use the energy it has stored in the built in capacitors to save the exact position the print head was at. Once power has been resumed the build can carry on from that exact place.

    Remote Printing Monitoring- Featuring a heat resistant camera in the build chamber, the Endureal can provide live video streaming of the print progress.

    Advance Filament Sensor- Automatically detects when filament is jammed or used up using multiple sensors. These sensors can also tell you if you have enough filament loaded to complete your job.

    Blackout sensor

    Filament sensor

    Material loading


    Zortrax Endureal Sensors

    Temperature sensors measure temperature of crucial components

    Capacitive sensor measure and check calibration of build platform and nozzles

    Optical sensors to check the extruders position

    Fan stop sensor automatically detects if a fan disconnects or stops working

    Extruder sensor detects the extruders are connected and working properly

    Industrial Sensors


    Dual-Extruders

    Dual extrusion system capable of printing in high temperature filaments. These extruders are thermally shielded from the build chamber for safe operation. The Endureal is compatible with both dual and single extrusion modes.

    Dual extruders


    Example Applications

    Flight ready

    Load Bearing Components such as in Mechanical Engineering, Aerospace and Automotive- This part was printed in Z-PEI 9085 and has properties comparable to aluminium.

    High wear part

    High Wear Resistance parts such as in Mechanical Engineering, Aerospace and Automotive- This part was printed in Z-PEEK and is end use.

    Temperature resistance

    Great Strength to Weight ratio- this part was printed in PEEK where the high strength to weight ratio makes it idea for sliding parts.



    For further information and advice on how Zortrax can benefit your business, please do not hesitate to get in touch with one of our advisors by calling the telephone number at the top of the page, or by clicking the button below and requesting a call-back:

    Request a callback

    Data sheet

    Printing Technology
    FDM
    Build Volume W x D x H (mm) // W x D x H (inch)
    Z- 300mm x X- 400mm x Y- 300mm
    Extruder
    Dual
    Nozzle Diameter (mm)
    0.4mm
    Printing Temperature
    480 °C (896 °F)
    Platform Levelling
    Automatic measurement of platform points' height
    Operating System
    Mac OS Mojave/ Windows 7 and newer versions
    File Input Format
    .stl, .obj, .dxf, .3mf, .ply
    Compatible materials
    DUAL EXTRUDER: Z-PEEK, Z-PEI 1010, Z-PEI 9085, Z-ULTRAT Plus, Z-SUPPORT High-Temp (breakaway), Z-SUPPORT ATP (soluble with Z-SUPPORT ATP Activator)
    Compatible materials
    SINGLE EXTRUDER: Z-PEI 9085, Z-ULTRAT Plus
    Layer resolution
    200-250 microns (for 0.4 mm nozzle)
    Minimal wall thickness
    450 microns (for 0.4 mm nozzle)
    Software bundle
    Z-SUITE
    Connectivity
    Wi-Fi, Ethernet, USB