EnvisionTEC | EPIC

    The EnvisionTEC EPIC resin is developed to manufacture molds for castables and jewellery.

    Request a quote


    Free lifetime remote support on all products


    Ask us about our discounts for education

    The EnvisionTEC EPIC resin

    The EnvisionTEC EPIC resin is highly recommended for special order retail and other jewellery customers who need flexibility between large and small pieces and have top-level quality control in casting. The EPIC resin is an Exceptional Plastic Investment Casting material. The material holds a low wax content, containing only 8% liquid wax. EPIC allows for results similar to EnvisionTEC's wax-free PIC material. It is stiff with crisp details with outstanding surface finish. The main difference between EPIC and PIC material is the wax content. It gives EPIC the opportunity of additional flexibility up to 12 grams, where PIC only allows for up to 5 grams finish weight.

    Applications: Jewellery

    Material Properties
    ASTM MethodDescriptionValue
    DIN EN ISO 527-1Tensile Strength16.8 MPa
    DIN EN ISO 527-1Elongation at Break7.46%
    DIN EN ISO 178Flexural Strength23 MPa
    DIN EN ISO 178Flexural Modulus404 MPa
    DIN 1342-2Viscosity361,7 mPa's
    DIN EN ISO 178Bending Strain10.2%
    DIN EN ISO 180Izod Impact - Notched11.03 kJ/m2
    DIN EN ISO 1183-1Density1.178 g/cm3
    DIN EN ISO 868Hardness Shore D69
    DIN 53765Ignition Temperature350° C

    Data sheet

    Tensile Strength
    16.8 MPa
    Flexural Strength
    23 MPa