Polymaker - Polylite ABS

    25,00 €
    Bruttopreis
    Farben
    • Schwarz
    • Weiß
    • Blau
    • Grau
    • Orange
    • Gelb
    • Lila
    • Rot
    • Grün
    • Yellow Lemon
    • Polymaker Teal
    Durchmesser
    Menge

    Polylite is a set of 3D printing filaments composed with first-class raw materials who are high-quality and dependable. With Polylite, users are able to produce designs and prototypes with most 3D printing materials. This filament was designed with a resin that has a lower volatile content than original ABS resins called a bulk-polymerized ABS resin. This allow high-quality prints with almost no odor to be delivered.

    Packaging

    packaging PETG

    Notes

    • Bed Surface: BuildTak®, PEI sheet with ABS slurry
    • Cooling Fan: ON; OFF for better strength
    • Drying Settings: 80˚C for 8h

    For further information and advice on how Polymaker can benefit your business, please do not hesitate to get in touch with one of our advisors by calling the telephone number at the top of the page, or by clicking the button below and requesting a call-back:

    Rückruf anfordern

    PM70627

    Technische Daten

    Druckgeschwindigkeit
    30mm/s – 50mm/s
    Gewicht
    1kg
    Düsentemperatur
    245˚C – 265˚C
    Bed Temperature
    90˚C – 100˚C
    Glass Transition Temperature
    101˚C
    Tensile Strength
    33.3 ± 0.8 Mpa
    Flexural Strength
    59.0 ± 1.3 Mpa
    Young’s Modulus (MPa)
    2174 ± 285 Mpa
    Charpy Impact Strength
    12.6 ± 1.1 kJ/m2
    Vicat Softening Temperature
    104˚C

    Download

    Polylite ABS_SDS

    Download (2.35M)

    Polylite ABS_TDS

    Download (424.91k)

    Polylite ABS_PIS

    Download (1.05M)