Polymaker - PolyMide CoPA 6-6.6

    PolyMide is a set of nylon/polyamide based 3D printing filaments. Engineered with the Warp-Free technology designed by Polymaker, Polymide filaments are meant to add engineering features to nylon materials with ease in 3D printing.

    70,00 €
    Bruttopreis
    Farben
    • Schwarz
    Durchmesser
    Menge
    One week lead time

     

    Kostenloser lebenslanger Remote-Support für alle Produkte

     

    Fragen Sie uns nach unseren Bildungsrabatten

    PolyMide is a set of nylon/polyamide based 3D printing filaments. Engineered with the Warp-Free technology designed by Polymaker, Polymide filaments are meant to add engineering features to nylon materials with ease in 3D printing. The PolyMide CoPA originates from a copomyler of Nylon 6 and Nylon 6,6. Its features include great strength, toughness and it is also heat resistant with a tolerance up to 180˚C.

    Warp-Free Technology

    • Warp free technology allows for nylon-based filaments to be 3D printed with almost no warpage and great dimensional stability. This technology can create these specific filaments due to their unique features such as, the fine control of microstructure and crystallization behavior of Nylon that permits the material to let out all the internal stress before it solidifies. .

    Packaging

    packaging 750g

    Notes

    • Bed Surface: Glass with glue
    • Cooling Fan: OFF
    • Drying Settings: 80˚C for 12h
    • Advised: It is strongly advised to use the PolyBox™ when printing with PolyMide™ CoPA and to store it in the resealable bag. To guarantee a good heat resistance of your printed part it is recommended to anneal your PolyMide™ CoPA 3d printed model. Annealing settings: 70˚C for 2h When used extensively, PolyMide CoPA can be abrasive to brass nozzles. When using PolyMide CoPA, we recommend to switch to a wear resistant nozzle such as hardened steel nozzle.

    For further information and advice on how Polymaker can benefit your business, please do not hesitate to get in touch with one of our advisors by calling the telephone number at the top of the page, or by clicking the button below and requesting a call-back:

    Rückruf anfordern

    PM70808

    Technische Daten

    Druckgeschwindigkeit
    30mm/s – 50mm/s
    Gewicht
    750g
    Düsentemperatur
    250˚C – 270˚C
    Bed Temperature
    25˚C – 50˚C
    Melting Temperature
    190˚C
    Glass Transition Temperature
    67˚C
    Tensile Strength
    66.2 ± 0.9 Mpa
    Flexural Strength
    97.0 ± 1.1 Mpa
    Young’s Modulus (MPa)
    2223 ± 199 Mpa
    Charpy Impact Strength
    9.6 ± 1.4 kJ/m2
    Vicat Softening Temperature
    180˚C

    Download

    PolyMide CoPA_TDS

    Download (480.56k)

    PolyMide CoPA_SDS

    Download (2.32M)

    PolyMide CoPA_PIS

    Download (7.03M)

    Vielleicht gefällt Ihnen auch